SP synthetic Grinding fluid
SP synthetic Grinding fluid
【Features】
This powerful synthetic grinding fluid is used to adapt to high speed, strong grinding conditions, 5% of its diluents liquid sintering load (PD) value≥ 1568N(160 KGF). During the high speed grinding and deep slow in large amount of grinding (with grinding car) process, which grinding wheel linear velocity is higher than 100 m/SEC, it shows the performance of lubrication, cooling, cleaning and reliable rust corrosion, low foam, non-toxic, odorless. This product does not contain sulfur, phosphorus, chlorine type additives, no stimulation to skin and eco-friendly. Laboratory tests show that the product data such as tapping torque is equal to or better than some of the same type imported goods; Field use statistics show that the cutting liquid ratio, and the general use of this product grinding than can increase 2.5 to 3.5 times. It can significantly reduce the grinding wheel wear and tear, improve the efficiency and machining precision, able to obtain the same effect of the same technology import cutting (grinding) liquid.
【Purpose 】
Applicable to Lubricate and cool the introduction machine or assembly line for grinding machine tool purposes. Particularly suitable for deep slow into condition of the high speed grinding machine (grinding generation car).
【Usage】
Using water to dilute concentrated liquor of the product to the specified concentration, use after stirring. The recommended concentration of various process conditions and product is shown as below.
Machining process/material |
Cast iron |
Nodular cast iron |
Carbon steel |
Alloy steel |
Copper alloy |
aluminum |
grinding |
4—5% |
4—5% |
4—5% |
6—8% |
3—4% |
5—6% |
brand |
SP202 |
SF-265 |
||||
【Quality indicators】this product conforms to the national standard GB/T6144-85 quality indicators.
Product quality standard
concentrate |
Project |
The technique indicators |
Test method |
|||
|
SP202 |
SF-265 |
|
|||
appearance |
Without stratification, precipitation, and homogeneously liquids |
GB/T6144-2010 |
||||
Storage stability |
No delamination, phase transformation and gel, etc. Recover quality after the experiment |
|||||
diluent |
transparency |
transparent |
||||
PH |
8-10 |
|||||
Defoaming property ml/10min |
≤2 |
|||||
Surface tension dyn/cm |
≤40 |
|||||
Corrosion experiment |
Level of grey cast iron |
55±2℃ |
24 |
|||
red copper |
8 |
|||||
Ly12aluminum |
8 |
|||||
Antirust experiment |
Level of grey cast iron35±℃ |
Single chip |
24 |
|||
lamination |
4 |
|||||
No card bit load (5% diluent) |
≥200 |
|||||
Fitness machine paint of the machine |
No fall off, craze, blister, sticky and so on |
|||||
Concentration detection of NO2 |
none |
|
||||
【Caution 】this product is unfavorable to mix with other brands of grinding fluid, such as the need to mix, must make mixing solubility test.
【Packaging 】200 kg drum packing
【Storage & Transportation】Storage & Transportation
Previous：HF-9 roll bracket anti-wear lubricant
Next：HL-1 metal cutting fluid
